Mobil Delvac Ultra 5W-40 Ultimate Defense

Product code:
Mobil Delvac Ultra 5W-40 Ultimate Defense – synthetic engine oil of SAE 5W-40 grade
Brand Mobil
Base Synthetic
Viscosity (SAE) 5W-40
Engine Diesel
ACEA E4, E7
Package (Liters):
4 l 20 l 208 l
In stock
Product with the selected option combination is not available for purchase
This product is not available for purchase
1,510 ₴ 1,680 ₴
  Product is certified and meets all necessary international quality standards. The originality of the product is guaranteed by official distributor.

Categories: Oils for Trucks

Tags: Mercedes-Benz, Caterpillar, Volvo, Renault, MAN, Cummins, Mack, Isuzu, MTU

Overview

Product Description

Mobil Delvac Ultra 5W-40 Ultimate Defense is an advanced synthetic technology ultra high performance diesel engine oil that provides excellent lubrication including long drain capability, helping towards long engine life for diesel engines operating in severe applications. The advanced technology behind this product delivers exceptional performance in turbo-charged as well as older naturally aspirated engines. Mobil Delvac Ultra 5W-40 Ultimate Defense is recommended for use in a wide range of heavy-duty applications and operating environments found in trucking, mining, construction, agriculture and marine.

Mobil Delvac Ultra 5W-40 Ultimate Defense replaces Mobil Delvac 1 5W-40.

Features and Benefits

Modern high output diesel engines run hotter than older engines which significantly increases the demands on engine lubricants. Current tighter engine designs reduce oil consumption, resulting in less fresh oil makeup to replenish depleted additives. Top piston rings are located higher bringing the oil film closer to the combustion chamber where temperatures increase thermal stress on the lubricant. Mobil Delvac Ultra 5W-40 Ultimate Defense helps to protect the engine under severe operating conditions. It is also fully compatible with conventional mineral oils. The key benefits include:

Features Advantages and Potential Benefits
Excellent thermal and oxidation stability Control of low temperature sludge build-up and high temperature varnish deposits
High TBN Helps towards extended drain intervals with high Sulphur fuels
Advanced formulation and viscometrics Maintains viscosity in severe, high temperature service
Excellent low temperature pumpability Easier engine start-up and reduced wear
Good resistance to corrosion Helps towards long life of critical wear surfaces
Long drain capability Helps towards good operating efficiency and lower overall cost
Component compatibility Long gasket and seal life, extended service intervals
Low volatility, excellent wear and bore polishing control Good oil consumption control

Applications

  • Mobil Delvac Ultra 5W-40 Ultimate Defense is recommended for use in super high performance diesel applications including turbo-charged and naturally aspirated engines designs

  • On-highway engines operating in both high speed/high load and short haul pick-up/delivery

  • Off-highway and marine engines operating in severe low speed/heavy load conditions

  • Diesel powered equipment from European builders

Specifications and Approvals

This product has the following approvals:
RENAULT TRUCKS RLD-2
VOLVO VDS-3
MTU Oil Category 3
MAN M 3277
MB-Approval 228.5
MAN M 3377
Mack EO-N
DTFR 15B120
Cummins CES 20077
Cummins CES 20078

 

This product is recommended for use in applications requiring:
API CF-4
API CG-4

 

This product meets or exceeds the requirements of:
API CH-4
API CI-4
API CI-4 PLUS
JASO DH-1
ACEA E4
ACEA E7
Caterpillar ECF-2
Cummins CES 20076
ISUZU DEO (w/o DPD Equipped Vehicles)

Properties and Specifications

Property Value
Grade SAE 5W-40
Density @ 15.6 C, g/ml, ASTM D1298 0.849
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 15.4
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 92.7
Total Base Number, mgKOH/g, ASTM D4739 14.5
Ash, Sulfated, mass%, ASTM D874 1.2
Flash Point, Cleveland Open Cup, °C, ASTM D92 221
Viscosity Index, ASTM D2270 174
Pour Point, °C, ASTM D97 -48

 

Mobil is the world's leading synthetic engine oil brand delivering our ultimate performance and protection. Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice.

Revision: 05-2024

Specifications
Brand Mobil
Base Synthetic
Viscosity (SAE) 5W-40
Engine Diesel
ACEA E4, E7
API CF-4, CG-4, CH-4, CI-4, CI-4 Plus
JASO DH-1
Caterpillar ECF-2
Cummins CES 20076, CES 20077, CES 20078
Isuzu DEO
Mack EO-N
MAN M 3277, M 3377
Mercedes-Benz DTFR 15B120, MB 228.5
MTU Oil Category 3
Renault RLD-2
Volvo VDS-3
Reviews
See also
7,310 ₴ 8,120 ₴
0
In stock
290 ₴ 320 ₴
0
In stock
300 ₴ 330 ₴
0
In stock